From Quad Cities International Airport (MLI / KMLI), Europe, Africa and Asia are within easy reach. Choose a continent to see destinations in their flag colours, with estimated charter flight times from Moline.
Distances and flight times are great-circle estimates including taxi, climb, and descent allowances, and vary with aircraft type, routing, winds, and air traffic. All charter pricing and timings are confirmed in a written quote.
10,002 ft at 590 ft of elevation. Quad Cities takes this entire fleet at weight, and the word International in its name describes a customs designation, which is exactly the part a private arrival needs.
10,002 ft at 590 ft, and International means customs rather than routes
Private jet charter to the Quad Cities reaches Moline, Rock Island, Davenport and Bettendorf, the 4 cities on the Mississippi that the region is named for, from a field in Moline, Illinois. Quad Cities, MLI or KMLI, has runway 9 / 27 at 3,049 metres, 10,002 ft, in concrete, at 590 ft of elevation.
All 6 aircraft in this fleet depart at maximum take off weight, the tightest with more than 1,900 ft unused. There are 2 further runways, 13 / 31 at 7,301 ft and 5 / 23 at 3,514 ft, and the first of those produces a result worth reading about below.
The airport is called International and has no international scheduled passenger service at all. That sounds like a contradiction and is not one, and for a private flight it is the single most useful fact on this page. What follows is the airport in detail, the aircraft ladder, the season along the Mississippi, and the questions travellers ask most. Where a quote, a slot or a timing decision is involved, Fly with Andreea handles it on your behalf.
A 3,049 metre runway at 590 ft, and what that allows.
The number that decides which aircraft can be quoted.
At 590 ft the correction is about 1.071. A Global 6000 needs around 8,031 ft against 10,002 available, leaving more than 1,900 ft unused. That is the tightest of the 6 here.
International here means an official port of entry with a Foreign Trade Zone and a customs office on the field. That is precisely what allows an international general aviation arrival to clear at Moline rather than diverting to Chicago first, and it is a genuine convenience on a transatlantic or Canadian sector.
What it does not mean is an international route network. There is no scheduled international passenger service, and a page that implied one would be misleading. The designation is about clearance, not about airlines.
The second runway, 13 / 31 at 7,301 ft, puts a Global 7500 about 88 ft outside the runway at this elevation and a Global 6000 more than 700 ft outside. So the 2 largest cabins come down to the main runway, which has ample room for both.
6 aircraft, and the runway decides which of them can depart at weight.
The longest nonstop sector from MLI is therefore about 7,084 nautical miles. Beyond that the itinerary uses a longer runway nearby or accepts a fuel stop, and we say which before quoting rather than after.
At 10,002 ft the main runway takes a narrowbody VIP airliner comfortably, and a customs office on the field means an international group arrival clears here rather than stopping somewhere larger first. A widebody VVIP type at weight is beyond this runway. The movement starts at Quad Cities itself. Are you looking to charter a group or VVIP airliner for a trip to Moline, or do you need specs for a specific route or passenger count?
Demand here is not evenly spread, and the peaks are sharp.
A private jet to Moline costs from EUR 8,500 for a short light jet sector up to EUR 79,000 for the longest route on this page, always one fixed all-in figure.
International here means an official port of entry with a Foreign Trade Zone and a customs office on the field. That is precisely what allows an international general aviation arrival to clear at Moline rather than diverting to Chicago first, and it is a genuine convenience on a transatlantic or Canadian sector.
Computed for the most popular departures on this page, flight time and honest range together.
The right answer depends on the aircraft, the party and the date.
How the field came to be, and what shaped the runway.
Answers grounded in real operational detail at MLI, and useful background wherever you fly.
From about EUR 8,500 for a short light jet sector into MLI, rising to around EUR 79,000 for the longest route on this page. Every figure is one fixed all-in price confirmed in writing, and Fly with Andreea returns it for your exact dates.
About EUR 76,000 on a ultra long range jet, roughly 7h 46m in the air. The exact figure moves with the date and aircraft positioning.
As a rule of thumb, EUR 5,600 to 9,400 on a light jet and EUR 9,400 to 12,600 on a midsize, before positioning and handling. 2 hours from Quad Cities reaches Chicago, Minneapolis, St Louis, Kansas City, Detroit, Toronto and Atlanta.
7 guests fits a Phenom 300E, which covers the whole midwest and eastern Canada without a stop.
An empty leg, and the proximity to Chicago means aircraft reposition through here regularly.
Below roughly 200 flying hours a year charter wins on cost, for any cabin in this fleet.
The runway is 3,049 metres, which is 10,002 ft, so the aircraft that operate at maximum take off weight are Embraer Phenom 300E, Citation XLS+, Challenger 350, Falcon 2000LXS, Global 6000, Global 7500. The longest nonstop sector from here is about 7,084 nm.
Yes. At about 10,002 ft of runway, MLI clears the Global 6000 and the Global 7500 at maximum take off weight with margin.
Anything in the fleet on the main runway. The 2 largest cabins are restricted to it.
A Global 7500, and Quad Cities takes it on the main runway at maximum take off weight with more than 2,500 ft to spare.
Quad Cities works to published hours with extensions arranged in advance, and customs is arranged with the slot.
In the peak winter weeks, yes in practice. MLI runs an extraordinary seasonal peak for its size, so slots, parking and handling are all arranged ahead. Outside those weeks it is straightforward.
Arrivals from outside the Schengen area are cleared on request through the business aviation facility, and it is arranged before departure rather than on arrival. We confirm the requirement against your passports for both ends.
Alpine weather moves quickly and winter operations continue in snow, with the surface cleared through the season. We plan a realistic alternative on every winter itinerary rather than assuming the forecast.
Rarely tight. A field of this size is built for short notice, and the customs office is arranged in advance.
Ground transfer is arranged alongside the flight as one booking, and the timings are confirmed with your written quote rather than left to the day.
10,002 ft. 3,049 metres of concrete at 590 ft of elevation.
7,301 ft. 13 / 31 at 2,134 metres, and it puts a Global 7500 88 ft outside.
3,514 ft. 5 / 23 at 1,071 metres, below the smallest jet in this fleet.
Ski bags through the winter and golf bags through the summer, all sized at quoting stage.
In most cases yes, and gladly. Well behaved pets travel in the cabin beside you rather than in a hold. United States sets its own entry rules on vaccination, microchipping and paperwork, and we confirm both ends before departure.
15 to 30 minutes through the business aviation facility, which is the usual figure here.
Never expected, always appreciated. A note to the operator lands equally well.
Quad Cities, MLI or KMLI, at Moline in Illinois. Runway 9 / 27 is 3,049 metres, 10,002 ft, in concrete, at 590 ft of elevation.
Moline, Rock Island, Davenport and Bettendorf, the 4 cities on the Mississippi that the region is named for.
Both at maximum take off weight on the main runway. A Global 6000 needs around 8,031 ft against 10,002 available, leaving more than 1,900 ft unused.
Because International here describes a customs designation rather than a route network. It is an official port of entry with a Foreign Trade Zone and a customs office on the field.
It is the single most useful fact about the airport. It means an international private arrival can clear customs at Moline rather than stopping at a larger field first, which saves real time on a transatlantic or Canadian sector.
3. The main runway at 10,002 ft takes the whole fleet, 13 / 31 at 7,301 ft takes 4 of the 6, and 5 / 23 at 3,514 ft is below the smallest jet in this fleet.
At 7,301 ft and this elevation a Global 7500 needs around 7,388 ft, about 88 ft more than the runway offers, and a Global 6000 is more than 700 ft over. Both come down to the main runway, which has ample room.
Because the aircraft's padded balanced field length is 6,900 ft, which sits inside the band a great many regional runways fall into, roughly 6,700 to 7,300. Fly with Andreea has now recorded that type inside the threshold at 8 different runways, more than any other type. It is not a marginal aircraft. It is marginal against one particular length of runway.
About 15 minutes in the air on a 121 nm leg.
About 1 hour 05 in the air on a 499 nm leg.
It works to published hours with extensions arranged in advance, and customs is arranged with the slot.
Rarely. A field of this size is built for short notice, with 43,366 aircraft operations a year and 85 based aircraft.
It begins as Franing Field, 120 acres of level grassy land, and serves as a control point for the first coast to coast flight in autumn 1919.
An aircraft hangs in the passenger terminal. It is the only type ever manufactured in Moline, and an altitude record was set above the airport in one of them in 1929.
It depends on the sector, the aircraft and the date. Every price on this page is a written all in figure for the aircraft named, and Fly with Andreea confirms it before you commit.
15 to 30 minutes through the business aviation facility, which is the usual figure here.
A narrowbody VIP airliner is workable on the main runway at 10,002 ft depending on the sector and the load. A widebody VVIP type at weight is beyond it.
Repositioning flights at a fraction of the price.
Learn more →Milestones and getaways planned end to end.
Learn more →Medically-equipped aircraft and specialist crews, arranged 24/7.
Learn more →On-demand charter for business and leisure, anywhere in the world.
Learn more →Large-cabin jets with stand-up comfort and full galleys.
Learn more →Airliner-size cabins configured for private travel.
Learn more →Tell us your route, dates, and party size. Fly with Andreea sends back a clear, all-in quote with the right aircraft, and takes care of the slots, permits, and every detail on the ground. All you do is travel.